One-Pfoot replacement reel feet
All One-Pfoot replacement reel feet are made from the highest grade aluminum and stainless steel to ensure that the One-Pfoot will last as long as Grandad’s favorite Medalist. The replacement reel foot includes four mounting bushings and four screws.

Counter Balances (Large & Small Diameters / High & Low Profiles)
We offer our counter balances in the two diameters and two profiles listed below. Please review the guidelines below for determining the correct size for your reel.

Large Diameter – High Profile
This counterbalance is most generally adapted to the more modern (the 1960s and onward Medalist) that have 0.250” diameter spool holes. They have been highly polished to eliminate any burrs that might interfere with line control and smooth line running. See guidelines below for determining the correct size for your reel.

Small Diameter – High Profile
These small diameter counterbalances are made especially for those older Medalists that have the 0.220” diameter spool holes such as those found on many 1300 and 1400 series Medalists.
This little “gem” of an add-on is just what your reel needs. They have been highly polished to eliminate any burrs that might interfere with line control and smooth line running. They will add beauty to any vintage Pflueger Medalist without detracting from its value. See guidelines below for determining the correct size for your reel.

Large Diameter – Low Profile
They have been highly polished to eliminate any burrs that might interfere with line control and smooth line running. See guidelines below for determining the correct size for your reel.

Small Diameter – Low Profile
They have been highly polished to eliminate any burrs that might interfere with line control and smooth line running. See guidelines below for determining the correct size for your reel.

Guidelines for Selecting the Correct Size of Counterbalance
When ordering please specify the spool hole diameter of your Pflueger Medalist. If you are unsure of the hole diameter (the outer hole opposite the handle) of your Medalist reel, here is a quick little test that will help you determine the correct counterbalance for your reel.

If you can drive a #2 pencil eraser into the hole with a little force you probably have the 0.250 diameter hole spool and would order the large diameter counterbalance. If the eraser looks like there is no chance of going through the spool hole you will probably need the small 0.220 diameter counterbalance for your Medalist. If you are still unsure, please feel free to contact One-Pfoot.

Note: The backing screw for the Large Diameter balance requires a 3/32″ hex key; and the screw for the Small Diameter balance requires a 5/64″ hex key.

• Please note: International shipping rates are not automatically applied. We will contact you with actual cost.

Drag Plates 

Drag Plates (Reversible for Medalist)
The “piece de resistance” for all you Pfluegerphiles. We are now manufacturing a limited quantity of drag plates machined from a single piece of high quality, cold-drawn carbon steel.

They have also been industrial chrome-plated for maximum corrosion resistance. This beautiful piece has that “old time” look and feel that is very reminiscent of the older original Medalist ratchets. As with our other drag plate, 8 indents on both sides make the Chrome Drag Plate fully reversible for left- and right hand retrieve.

Our One-Pfoot drag plate is made of T6061 aluminum with a sapphire-hard coat applied to the surface. This hard coat not only builds up on all surfaces but actually penetrates into the aluminum substrate to form a long lasting durable finish to this most vital part. As with our other drag plate, 8 indents on both sides make the Hard Coat Drag Plate fully reversible for left and right hand retrieve.

• Please note: International shipping rates are not automatically applied. We will contact you with actual cost.

Click Pawl Parts (Stainless) for Medalist
We made these click pawls of a tough stainless steel that has superior wear capabilities and is very corrosion resistant. The click pawl kit includes a stainless steel replacement spring that will add new life to the tired braking system of your favorite Medalist.

• Please note: International shipping rates are not automatically applied. We will contact you with actual cost.

Brake Adjusting Screw, #4-36 LH
One-Pfoot’s brake adjusting replacement screw is made of stainless steel featuring the delicate CNC turned 4-36 left-hand thread that has been used forever by Pflueger. This part, along with One-Pfoot’s Spool Latch Cover and Replacement Handle, will allow you to resurrect your old Pflueger by replacing the plastic parts that frequently deteriorated on this beloved reel. The brake adjusting screw comes with complete installation instructions and illustrations.

• Please note: International shipping rates are not automatically applied. We will contact you with actual cost.

Replacement Handles
The One-Pfoot Replacement Handles are made with strong synthetic materials and are
available in Swirl, Cream-White, and Butterscotch. The kit includes one handle and the nickel-silver retaining cap. These replacement handles are sure to spruce up that old tired handle on your current Medalist. We also offer customized handles by special order. Please contact us for details.

• Please note: International shipping rates are not automatically applied. We will contact you with actual cost.

Spool Latch Cover
Here’s a quality machined replacement spool latch cover for all those cracked, warped, or lost
ivory plastic originals. This cap is an exact replica of the early aluminum Medalist spool covers.
Carefully machined and milled to exact tolerances, this spool cover will give your treasured Medalist Pflueger a new sparkle.

• Please note: International shipping rates are not automatically applied. We will contact you with actual cost.

Sculpted Pillars
These delicate looking Sculpted Pillars are made to look like the original pillars that made the early Medalist such a distinctive reel. They are machined from 6061T6 aluminum and then hard coat anodized to ensure a long life with a minimum of wear and scratching.
The older original Medalist sculpted pillars were pinned to the reel frame with a drive screw. Our Sculpted Pillars are drilled and tapped with a roll form thread in each end ensuring the best possible fit for the common 3-48 Medalist screws. These handsome add-ons will truly
dress up your Pflueger Medalist!

• Please note: International shipping rates are not automatically applied. We will contact you with actual cost.

Screws (Old and New)
One of the most asked for items over the years has been the small head 3-48 screws that were so often used in the building of the early Medalists. These stainless screws make this the perfect replacement for all those older Medalist reels.

NOTE: Please take a few minutes to carefully examine the images above before ordering replacement screws. You may get a better idea of the screws that you need for your reel by taking one out of your reel and comparing it to the diagram.

You can view the Replacement Screw photo’s, tuning and installation tips Here.

• Please note: International shipping rates are not automatically applied. We will contact you with actual cost.

Spool Cam Release Springs
This is a fancy name for the Spool Latch Cover springs. A firm, strong, stainless spring that will put new life into your Medalist.

• Please note: International shipping rates are not automatically applied. We will contact you with actual cost.

Line Guide
Have One-Pfoot add this Line Guide to your Medalist. Made from high-quality stainless steel, polished and hand-fitted to your reel. This is only available when installed at One-Pfoot, either alone or as part of a full upgrade of your Medalist reel.

• Please note: International shipping rates are not automatically applied. We will contact you with actual cost.